Measurement Computing eZ-TOMAS rev.11.0 - Manual (Page 92)

The “Change Password” command, in the Security pull-down menu, opens the Change Project Password
dialog box (see following figure). This dialog box will only be visible when the user selects the “Change
Password.” option. Note that you can only access the Change Project Password box from User Level 3.
Changing the Project Password
To change the password:
1. Open the Security pull-down menu.
2. Select “Change Password.” Note that you can only do this from User Level 3.
The Change Project Password dialog box will open.
3. Type the desired password in the field below “Enter Level 3 Password.”
4. Re-enter the password in the “confirm” text box.
5. Press the <OK> button.
If the confirmed password was entered correctly the new password will be in effect.
10-2 Security Menu 947494 eZ-TOMAS