Measurement Computing eZ-TOMAS rev.11.0 User Manual
Page 81
Report Generation Dialog with “Alarm RPM Range Limits” Selected
In the Report Generation dialog box above, the user is creating a report for channel's 1 and 2, referenced to
tach T1. The report will show the Maximum values that were acquired for the first four Spectral Bands of
channel's 1 and 2 when the Turbine RPM range was within any one of the 3 selected Ranges. The report
will also show the Maximum value obtained when the Turbine was running outside any of the 3 selected
ranges [because the “Out of Ranges” check-box has been selected]. The report will include the Limits set-
points that are associated with each specified Channel, Tach, RPM Range and Spectral Band.
After the selection of report options has been made, click the <Create Report> button to have eZ-TOMAS
start Excel and create the report. If Excel is already running when the button is clicked the report will be
created in a new Worksheet in the currently selected Workbook. After the report has been created, the XL
Report dialog box will be closed and the current Report option settings will be saved in the project settings.
Follow these steps if you do not wish to create a Report at this time, but want to set the Report options and
save them:
1. Select the desired report options.
2. Click the <Apply> button. This saves the Report settings.
3. Click
eZ-TOMAS
947494
Display Menu …. Reports 8-9