LSC Lighting CLARITY LX Series v.1 - Manual (Page 72)

LX Console Controls Clarity
Operator Manual
Page 62
 To assign a Playback, tap the Cue-list name or Chase name (italics) to be assigned. All
of the playback touch screens flash red. Tap the playback’s touch screen to which the
cue-list or chase is to be assigned.
 To clear a Playback, tap Clear Playback. All of the playback touch screens flash red.
Tap a playback’s touch screen to clear it.
8.7.10 Configuring a Playback
To configure a cue-list or chase already assigned to a playback, double tap on that playback’s
touch screen and the “Configure Playbacks” tab appears.
This screen allows you to change the cue-list into a chase or vice versa and to alter all of its
playback settings. These settings are also available and fully described in the “Control Booth”
window. See section 25.2 for details.
8.7.11 Playback Pages
Each bank of 15 playbacks has 99 pages of Playbacks available split into left and right banks with
an adjustable bank divider. The LX900 has 30 playbacks and each bank of 15 playbacks has
separate left and right pages.
The left/right division of the playback pages playbacks is shown as a yellow vertical line with a
green bar above the left section and a blue bar above the right section.
Pages are changed using either the virtual page buttons on the playback’s touch screen or the
real buttons below the playback’s touch screen.
 The right  (page up) and  (page down) buttons step through the right pages.
 The left  (page up) and  (page down) buttons step through the left pages.
 To go directly to a page number on a side, press and HOLD either page button on that
side then enter the page number using the numbered playback flash buttons.
For example, Holding  and pressing 6 = page 6. Holding  and pressing 2, 2 = page 22.
There are 99 pages available.
Left/Right
Page Divider
Left/Green
Pages
Right/Blue
Pages