LSC Lighting CLARITY LX Series v.1 - Manual (Page 175)

Clarity Record
Operator Manual
Page 165
 Clearing the programmer after every recording is often used when cues are to be played
back in Cue only mode. This is because what you see on stage from the programmer is
what will be reproduced when the cue is played back, irrespective of whether you
choose to exclude or include unchanged information when you record the cue.
24.3 RECORD OUTPUT
To record the current output of Clarity press Record then, in the record dialogue box, select
“Blocking – all fixtures” in the “Contents Options” pane. This records a snapshot of the lights on
stage, complete with the proportional levels of any playback masters.
24.4 EDITING CUES
When a cue-list that you have recorded is selected for editing (see section 26), the cue-list
appears in the Programmer window Session Control showing the Cue-list name (beside the
Programmers) and the individual cues within the cue-list above. This cue-list becomes the
“current session” and by default it Blind (not seen or affecting the output).
Cue-list containing 5 cues.
You can click on any of the cues in the list to edit them. When a cue is selected, the attributes
in that cue can be altered in exactly the same manner as when creating a cue. If you want to
see the changes that you are making on the output click Blind on the Programmer toolbar to
toggle the current session to .
Hint: You can always open an edit session by un-ticking “Start cue-list edit
blind” in the Show/Preferences dialog box.
Records all
output