LSC Lighting CLARITY LX Series v.1 - Manual (Page 53)

Clarity LX900
Operator Manual
Page 43
7.5 LX900 SPLIT CROSS FADE
The LX900 has a “theatre style” split crossfade. It has individual motorised faders for the
incoming (up) fade and outgoing (down fade), Go and Pause/back buttons plus a dedicated
touch screen for status and configuration.
LX900 Split Playback
To quickly assign a cuelist to the split playback, double tap the touch screen then press the
select button of playback containing the cuelist. Currently the split playback is an extension of
the master playback, so is only assignable from an existing physical fader assignment.
To configure the split playback (or assign a cuelist) hold its Select button. The LCD shows…..
 Assign. Press a select button on a playback to assign that playback to the split
playback.
 Join. The In fader controls both the In fade and the Out fade. The Out fader does
nothing.
 Auto advance. When enabled, the cuelist will automatically advance to the next cue
when the in fade and out fade both reach 100%.
 Auto loop. When the cuelist reaches the last cue it will start again at the first cue.
 Clear. Clears the current cuelist from the split playback.
The buttons have the following functions:
  (Go): Plays the next cue in the cue-list or restarts a paused fade. Pressing  will
start the fade to the next cue even if the current fade has not finished.
Press Function+  to snap to the next cue.
o The indicator in the button lights during the transition to the next cue.
If the playback contains a chase, pressing  will start the chase. If you continue tapping  (to
the beat of the music) it will automatically adjust the chase speed to the beat.
Pause/
Back
Go
In
Fader
Out
Fader
Select
Touch
screen