LSC Lighting CLARITY LX Series v.1 - Manual (Page 211)

Clarity Show Files
Operator Manual
Page 201
30.4.1 Merge Fixtures
You can choose to “Ignore”, “Append” or “Merge” Fixtures.
 Ignore: If you choose “Ignore” then Groups, Cuelists and Playbacks cannot be
merged because they need fixture information.
 Append: Select this option if all of the incoming fixtures are different to the current
fixtures. It will add the incoming fixtures to the current patch in the next available
universe. You can leave a gap between universes by entering a number in the “Patch
universe offset”. For example, if the current show has all of its fixtures patched in
Universe A and the offset is set to 2, then the appended fixtures will be patched to
Universe C.
 Merge: Select this option if any of the incoming fixtures are the same fixtures as in
the current show. It opens the “Merge Pairs” dialog box:
To merge an incoming fixture with the same type of fixture in the current show, select
the incoming fixture and the current fixture to which it will be merged. The selected
fixtures are removed from the “Incoming fixtures” and “Current fixtures” panes and
appear as a single fixture in the “Merge pairs” pane.
To undo a merge, select the Merge pair.