LSC Lighting CLARITY LX Series v.1 User Manual
Page 180
Control Booth
Clarity
Operator Manual
Page 170
Playback Options
Release at end. When the last cue has completed its fade, the cue-list is automatically
released. If not set to release at end, it will loop back to the first cue.
Loop at end. (Default setting) When the last cue has completed its fade and the cue-
list is not set to release at end, it will loop back to the first cue. If not ticked it will
remain on the last cue.
Go on fader up. The first cue of the cue-list is automatically started and faded up when
the playback fader is raised above zero. Subsequent fader movement only controls
intensity.
Release on fader down. The cue-list is automatically released when the playback
fader is lowered to zero.
Release on pause/back. Causes the pause/back button to release the playback
instead of stepping back (useful for chases).
Action/Go button toggle. When a cue-list is assigned to a Playback or to an LX600 or
LX900 “Action” button, if the cuelist is not active, pressing the Playbacks Go button or
the LX600 or LX900 Action button will play the cuelist. If the cuelist is active, pressing
the button will release the cuelist.
Action button flash. When a cue-list is assigned to an LX600 or LX900 “Action” button,
pressing the Action button will flash the cuelist. You will also need to select the cuelist
option “Go on fader Up” if you want the cuelist to Go the first time the flash button is
pressed.
Release when fully overridden. (Default setting) The cue-list is automatically
released if all of its channels/fixture attributes have been overridden by another
playback.
Ignore release all. The cue-list is not released by the Release All button.
Ignore grand master. The cue will not be affected by the grand master. Useful for
cues such as work lights or providing constant power to fixtures.
Release intensity first. (Default setting) When released, intensity fades out (in the
release time) then other attributes snap release. This prevents unwanted fixture
movements being seen.
Fader affects all attributes. The playback fader normally only affects intensity. When
ticked, the playback fader acts as a master over all attribute levels, in the same way as
the manual fader on the playback control panels.
Restart from last active cue. When a cue-list is released, then restarted, it will go
immediately to the last active cue. Normally, when a cue-list is released, it will start
from the first cue.