Harken 882 MKIII Jib Reefing & Furling - Manual (Page 8)

Parts
January 1999 Unit 1 MKIII 4
You should have at least two boxes: a long box with foils and a
rectangular box containing the drum and miscellaneous components.
You may also have a third box containing the headstay.
■ The foil box contains:
(6) 7' (2.13 m) Foil Extrusions. A standard kit has six foils, but one may have been pre-cut for use as your top foil. If
your headstay is longer than 45'8" (13.92 m) you should order one extra foil extrusion, Part 807.
(1) 24" (610 mm) Special Bottom Foil Extrusion.
■
The main components box contains parts packaged on the display card plus a smaller parts box.
Main Components
Halyard Swivel
Drum Assembly
Feeder
Torque Tube