Harken 3195 Black Magic Loop Blocks pre-2013 - Manual

I N S T R U C T I O N S
Loop Block
3195, 3196, 3199, 3201
1251 East Wisconsin Avenue • Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320 • Fax: (262) 691-3008 Web: http://www.harken.com • E-mail: [email protected]
Parts
You Must Supply
Part
No.
Sheave
Ø
Maximum Working Load
(MWL)
Breaking Load
(BL)
Max line Ø
that fits
through mouth lb kg lb kg
3195 57mm 2500 1134 5,000 2268 5mm
3196 75mm 5,000 2,268 10,000 4536 8mm
3199 100mm 7,500 3,402 15,000 6804 11mm
3201 125mm 11,000 4,990 22,000 9977 14mm
1) Head
2) Sideplates
3) Sheave
4) Dead-End Post
5) Block Mouth
6) Screw
7) Allen Wrench
8) Blue Loctite ®
1
2
3
4
5
6
7
6
8
Loop and/or High Strength Lashing Line
Refer to chart above and choose loop and/or high strength lashing that
matches or exceeds break strength (BS) of block. Note: See chart for
maximum line diameter that will fit through mouth.
4' (1.2 m) line included for lashing to head.
Part
No.
Sheave
w/Side Balls
Roller Cage
Assembly
3195 H-21635B HBB85
3196 H-21550B HBB86
3199 H-22123B HBB87
3201 H-23750C HBB88
Part
No. Screw
Dead-End
Post
3195 HFS796 H-43625
3196 HFS806 H-43461
3199 HFS816 H-43759
3201 HFS814 H-43816
Specifications
Sideplate A
Dead-End
Post
Roller Cage
Assembly
Sheave
Sideplate B
Screw
WARNING! Webbing or smaller lashings can be damaged by being
pinched between post and sideplate. Damaged webbing or lashings
can part suddenly under load. Use only loops when terminating at
dead-end post.
WARNING! Knots weaken line considerably. Consult qualified rigger
or line manufacturer for advice on securing line. Use high strength
loops or consult rigger for recommendations on lashing. Using the
wrong line or securing the line improperly can cause an accident.
Part
No.
Sheave
Ø
Sideplate
A
Sideplate
B
3195 57mm H-43623 H-43624
3196 75mm H-43456 H-43457
3199 100mm H-43757 H-43758
3201 125mm H-43814 H-43815
Loop Block Replacement Part Numbers
Small Control Line Included
Block
Part No.
Replacement
Part No.
Line
Length
Block
Part No.
Replacement
Part No.
Line
Length
3195 HCP1438 2 mm 3199 HCP1419 2.5 mm
3196 HCP1419 2.5 mm 3201 HCP392 3 mm
WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com/manuals for additional safety information.
= Incorrect. Avoid to prevent accidents.