Harken 144 Cam swivel base - Manual

I N S T A L L A T I O N S H E E T
Cam Swivel Bases
144, 205, 216, 360, 361, 402, 403, 1574
N15W24983 Bluemound Rd. • Pewaukee, WI 53072 USA
Tel: +1 (262) 691-3320 • Fax: +1 (262) 701-5780
Web: harken.com • Email: [email protected]
The swivel arm has a small amount of movement between arm and base.
Control movement by tightening four mounting screws until swivel begins to
bind. Then back screws off. Leave enough tension to slow arm rotation slightly.
(See drawing on reverse side)
Adjust Swivel Arm Rotation
Part
No.
Screw
Ø
Screw Spacing
(square pattern)
Use Base with
These Blocks
144
360 #10 (5 mm)
3 / 4 " (19 mm)
2.25", 3.00" Light Duty Hexaratchet ® ,
57 mm, 75 mm Carbo ® Air ® Blocks, inc.
Ratchet and Ratchamatic ® Blocks
205
216
361
#10 (5 mm) 3 /
4
" (19 mm)
Big Bullet, 2.25", Little Hexaratchet ® ,
57 mm Carbo ® Air ® Blocks
402 #10 (5 mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 2634
403 #10 (5mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 399, 2634
1574 1/4" (6 mm) 1 1 / 6 " (27 mm) Midrange, Hexaratchet ® Blocks
WARNING! Strictly follow all instructions to avoid an
accident, damage to your vessel, personal injury or death.
See www.harken.com/manuals for additional safety information.
WARNING! To achieve maximum working load of cam swivel base,
mount using screws (listed below), washers and locknuts in all four
(4) holes.
I N S T A L L A T I O N S H E E T
Cam Swivel Bases
144, 205, 216, 360, 361, 402, 403, 1574
N15W24983 Bluemound Rd. • Pewaukee, WI 53072 USA
Tel: +1 (262) 691-3320 • Fax: +1 (262) 701-5780
Web: harken.com • Email: [email protected]
The swivel arm has a small amount of movement between arm and base.
Control movement by tightening four mounting screws until swivel begins to
bind. Then back screws off. Leave enough tension to slow arm rotation slightly.
(See drawing on reverse side)
Adjust Swivel Arm Rotation
Part
No.
Screw
Ø
Screw Spacing
(square pattern)
Use Base with
These Blocks
144
360 #10 (5 mm)
3 / 4 " (19 mm)
2.25", 3.00" Light Duty Hexaratchet ® ,
57 mm, 75 mm Carbo ® Air ® Blocks, inc.
Ratchet and Ratchamatic ® Blocks
205
216
361
#10 (5 mm) 3 /
4
" (19 mm)
Big Bullet, 2.25", Little Hexaratchet ® ,
57 mm Carbo ® Air ® Blocks
402 #10 (5 mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 2634
403 #10 (5mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 399, 2634
1574 1/4" (6 mm) 1 1 / 6 " (27 mm) Midrange, Hexaratchet ® Blocks
WARNING! Strictly follow all instructions to avoid an
accident, damage to your vessel, personal injury or death.
See www.harken.com/manuals for additional safety information.
WARNING! To achieve maximum working load of cam swivel base,
mount using screws (listed below), washers and locknuts in all four
(4) holes.
I N S T A L L A T I O N S H E E T
Cam Swivel Bases
144, 205, 216, 360, 361, 402, 403, 1574
N15W24983 Bluemound Rd. • Pewaukee, WI 53072 USA
Tel: +1 (262) 691-3320 • Fax: +1 (262) 701-5780
Web: harken.com • Email: [email protected]
The swivel arm has a small amount of movement between arm and base.
Control movement by tightening four mounting screws until swivel begins to
bind. Then back screws off. Leave enough tension to slow arm rotation slightly.
(See drawing on reverse side)
Adjust Swivel Arm Rotation
Part
No.
Screw
Ø
Screw Spacing
(square pattern)
Use Base with
These Blocks
144
360 #10 (5 mm)
3 / 4 " (19 mm)
2.25", 3.00" Light Duty Hexaratchet ® ,
57 mm, 75 mm Carbo ® Air ® Blocks, inc.
Ratchet and Ratchamatic ® Blocks
205
216
361
#10 (5 mm) 3 / 4 " (19 mm)
Big Bullet, 2.25", Little Hexaratchet ® ,
57 mm Carbo ® Air ® Blocks
402 #10 (5 mm) 3 /
4
" (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 2634
403 #10 (5mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 399, 2634
1574 1/4" (6 mm) 1 1 / 6 " (27 mm) Midrange, Hexaratchet ® Blocks
WARNING! Strictly follow all instructions to avoid an
accident, damage to your vessel, personal injury or death.
See www.harken.com/manuals for additional safety information.
WARNING! To achieve maximum working load of cam swivel base,
mount using screws (listed below), washers and locknuts in all four
(4) holes.
I N S T A L L A T I O N S H E E T
Cam Swivel Bases
144, 205, 216, 360, 361, 402, 403, 1574
N15W24983 Bluemound Rd. • Pewaukee, WI 53072 USA
Tel: +1 (262) 691-3320 • Fax: +1 (262) 701-5780
Web: harken.com • Email: [email protected]
The swivel arm has a small amount of movement between arm and base.
Control movement by tightening four mounting screws until swivel begins to
bind. Then back screws off. Leave enough tension to slow arm rotation slightly.
(See drawing on reverse side)
Adjust Swivel Arm Rotation
Part
No.
Screw
Ø
Screw Spacing
(square pattern)
Use Base with
These Blocks
144
360 #10 (5 mm)
3 / 4 " (19 mm)
2.25", 3.00" Light Duty Hexaratchet ® ,
57 mm, 75 mm Carbo ® Air ® Blocks, inc.
Ratchet and Ratchamatic ® Blocks
205
216
361
#10 (5 mm) 3 / 4 " (19 mm)
Big Bullet, 2.25", Little Hexaratchet ® ,
57 mm Carbo ® Air ® Blocks
402 #10 (5 mm) 3 /
4
" (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 2634
403 #10 (5mm) 3 / 4 " (19 mm) 57 mm Carbo ® Air ® Blocks, 397, 399, 2634
1574 1/4" (6 mm) 1 1 / 6 " (27 mm) Midrange, Hexaratchet ® Blocks
WARNING! Strictly follow all instructions to avoid an
accident, damage to your vessel, personal injury or death.
See www.harken.com/manuals for additional safety information.
WARNING! To achieve maximum working load of cam swivel base,
mount using screws (listed below), washers and locknuts in all four
(4) holes.