Harken 438 Cam adapter plate - Manual

I N S T A L L A T I O N S H E E T
438 Cam-Matic Adapter ® Plate
N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: harken.com • Email: [email protected]
The 438 cam adapter plate makes mounting
150 and 365 Cam-Matic ® cam cleats to rounded
surfaces such as masts and booms secure and
easy. It is ideal for halyards on dinghies and small
keelboats, spinnaker pole adjuster systems and
outhauls.
Installing Cam Adapter Plate
1. Hold plate with center hole towards user.
Cam pawls will open this direction.
2. Using plate as guide, drill and tap center hole
only. Use chart below, determine correct drill size.
3. Screw plate to spar with center screw (apply
Loctite ® to threads) .
Fastener Size Drill Size Tap
10-24 9 / 64 " 10-24
10-32 5 / 32 " 10-32
5 mm 4.25 mm M5 x .8 mm
I N S T A L L A T I O N S H E E T
438 Cam-Matic Adapter ® Plate
N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: harken.com • Email: [email protected]
The 438 cam adapter plate makes mounting
150 and 365 Cam-Matic ® cam cleats to rounded
surfaces such as masts and booms secure and
easy. It is ideal for halyards on dinghies and small
keelboats, spinnaker pole adjuster systems and
outhauls.
Installing Cam Adapter Plate
1. Hold plate with center hole towards user.
Cam pawls will open this direction.
2. Using plate as guide, drill and tap center hole
only. Use chart below, determine correct drill size.
3. Screw plate to spar with center screw (apply
Loctite ® to threads) .
Fastener Size Drill Size Tap
10-24 9 / 64 " 10-24
10-32 5 / 32 " 10-32
5 mm 4.25 mm M5 x .8 mm
I N S T A L L A T I O N S H E E T
438 Cam-Matic Adapter ® Plate
N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: harken.com • Email: [email protected]
The 438 cam adapter plate makes mounting
150 and 365 Cam-Matic ® cam cleats to rounded
surfaces such as masts and booms secure and
easy. It is ideal for halyards on dinghies and small
keelboats, spinnaker pole adjuster systems and
outhauls.
Installing Cam Adapter Plate
1. Hold plate with center hole towards user.
Cam pawls will open this direction.
2. Using plate as guide, drill and tap center hole
only. Use chart below, determine correct drill size.
3. Screw plate to spar with center screw (apply
Loctite ® to threads) .
Fastener Size Drill Size Tap
10-24 9 / 64 " 10-24
10-32 5 / 32 " 10-32
5 mm 4.25 mm M5 x .8 mm
I N S T A L L A T I O N S H E E T
438 Cam-Matic Adapter ® Plate
N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: harken.com • Email: [email protected]
The 438 cam adapter plate makes mounting
150 and 365 Cam-Matic ® cam cleats to rounded
surfaces such as masts and booms secure and
easy. It is ideal for halyards on dinghies and small
keelboats, spinnaker pole adjuster systems and
outhauls.
Installing Cam Adapter Plate
1. Hold plate with center hole towards user.
Cam pawls will open this direction.
2. Using plate as guide, drill and tap center hole
only. Use chart below, determine correct drill size.
3. Screw plate to spar with center screw (apply
Loctite ® to threads) .
Fastener Size Drill Size Tap
10-24 9 / 64 " 10-24
10-32 5 / 32 " 10-32
5 mm 4.25 mm M5 x .8 mm