Harken 150KIT Cam cleat rebuild kit - Manual

150 Cam-Matic
®
Rebuild Kit
150KIT
Printed in USA 4685/03-13
Harken equipment requires minimal maintenance, but some is required to give
the best service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water.
In corrosive atmospheres, stainless parts may show discoloration around holes,
rivets and screws. This is not serious and may be removed with a fine abrasive.
Important: Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see
www.harken.com/manuals or the Harken
®
catalog.
Maintenance
Warranty
Cam-Matic ® Cam Cleat Not Included
375
Replacement
Parts in Kit:
Qty Description Qty Description
2 Cam Cap 2 Torsion Spring
66 Delrin ® Balls 1 Cam Base
2 Washer
145 296
295
137
298
425
Yellow, Blue, Red, Green, Black
Accessories You Can Purchase
for the 150 Cam-Matic ®
You can watch a video demonstration of rebuilding a cam at:
http://www.harken.com/Cam-Matic_Rebuild_Video/
Click on "Rebuild your 150 Cam Cleat” to play.
Video Demonstration
This baseplate
does not fit cams
built before 1993.
Delrin ® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates
Additional information:
www.harken.com\manuals