Harken 882 MKIII Jib Reefing & Furling - Manual (Page 10)

Parts
March 2003 Unit 1 MKIII 5
1 Bag of 17 Connector Wedges, 3 Extra Wedges
1 Prefeeder with line
1 Bag of 30 Foil Screws. Contains 6 extra screws
1 Bag of three Torque Tube Screws
1 Bag of Spare Screws. Contains one spare screw
for every application. They are not required for
installation
1 4 mm Allen Wrench
1 5 mm Allen Wrench
1 6 mm Allen Wrench
1 Locking Collar
1 Locking Split Cylinder - Used only with swage
terminals - Norseman ® , Sta-Lok ® . Rod installations
do not use this part
1 Instant Adhesive
1 Loctite
® (Blue)
1 Loctite ® (Red)
1 Feeder with Screw
These parts are placed on the headstay before assembly
and may be "missing" as the parts may have been placed
on your headstay in advance.
1 Top Foil Trim Cap
1 8
7 /
8
" (225 mm) Bottom Connector
6 7" (178 mm) Regular Connectors
If your headstay is longer than 46'4" (14.122 m)
you will need one more connector - Order part 810
IMPORTANT
Note: threaded headstay stud is sold separately.
Be sure that you have ordered the correct size for
your boat.
Miscellaneous Parts
Rigger Components
Packed loose in the box
1 Furling Line
70' (21.3 m ) of 5 /
16
"
(8 mm) Dacron braid
1 Owner's Package
Contains the instruction manual, warranty card
and other information
Foil Connector
Wedges
Prefeeder
Foil Screws
Torque Tube
Screws
Spare
Screws
Allen Wrenches
Locking
Collar
Plastic Split
Cylinder
Instant
Adhesive
Blue Loctite® Red Loctite®
Top Foil
Trim Cap
Bottom
Connector
Regular Connectors