Harken 447 Dinghy Vang System - Manual

407
405
Lower line
(5 mm)
Upper line
(3 mm)
Lower assembly
(455 if purchased separately)
Max working load = 450 lb (204 kg)
Breaking load = 1200 lb (544 kg)
Max sail area = 125 ft 2 (11.6 m)
Parts included (447 only)
Lower assembly
16mm AirBlock
®
405
Upper block 16 mm AirBlock
®
w/becket #407
Upper Line: 10' of 3mm polyester line
Lower Line: 10' of 5mm polyester line
Tools you must supply
Drill motor
5/32" (4 mm) drill bit (for screws)
10-32 (5 x .80 mm) tap (for screws)
Screw driver (for screws)
3/16" (5mm) drill bit (if pop rivets are used)
Pop rivet gun (optional)
Centerpunch
Pencil or fine-point marker
Parts you must supply
10-32 (5x .80 mm) stainless steel screws
(optional)
– or –
3/16" (5 mm) stainless steel pop rivets
Use shackle (246) if there is a bail or strap
to attach upper block to boom.
Use eyestrap (073) if there is no bail on
boom.
The enclosed vang is not for use on the
Laser. The Laser vang is a different part
and is only available through Laser
builders or their dealers. Please contact
your Laser dealer regarding availability.
I N S T A L L A T I O N S H E E T
15:1 Power Dinghy Vang
447 (System) or 455 (Lower Assembly)
N15W24983 Bluemound Road • Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: www.harken.com • Email: [email protected]