Harken 3122 Flip-Flop Block - Manual

I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.
I N S T A L L A T I O N S H E E T
1987/1989/3122/3194 Flip-Flop Blocks
Important
Flange must be assembled
to the inside at both ends
Reeve Line
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: http://www.harken.com • Email: [email protected]
To achieve maximum working load use four (4) screws
with backing plates, washers and locknuts. Use only A4
(316) or A2 (18-8) fasteners in the size listed in chart
on the reverse side. Ensure deck strength is equal to
block strength.