Comtech EF Data SDM-9000 - Manual (Page 79)

SDM-9000 Satellite Modem Operation
Rev. 4 4–5
4.2.1 Configuration
Refer to the menu trees (Figures 4-3 through 4-7) for configuration changes. Modem
configuration may be viewed or changed by entering the Configuration level from the
Function Select menu on the front panel. Once in the Configuration menu, press [
← ] or
[ → ] to select one of the following configurations:
•
Modulator
•
Demodulator
•
Interface
•
Save
•
Recall
Enter the selected configuration menu by pressing [ENTER]. Press [ ← ] or [ → ] to view the
selected configuration parameters. If a configuration parameter change is required, press
[ENTER] to begin the change process.
Press the arrow keys to change the parameters. After the display represents the correct
parameters, execute the change by pressing [ENTER]. This action initiates the necessary
programming by the modem.
To cancel a parameter prior to executing the change, simply press [CLEAR].
Notes:
1. Hardware configuration may change the front panel menu selection (all front
panel configuration windows are listed in the following paragraphs).
2. If a particular window is specific to a certain modem configuration, the user will
not be able to enter that window unless that configuration is selected. This
eliminates incompatible parameters from accidentally being set in the different
modes of operation.