Comtech EF Data SDM-9000 - Manual (Page 115)

Operation SDM-9000 Satellite Modem
4–42 Rev. 4
4.2.5.3 Utility Interface
TX OVERHEAD TYPE Select IDR or None for TX overhead type.
Note: The ESC option must be installed.
RX OVERHEAD TYPE Select IDR or None for RX overhead type.
Note: The ESC option must be installed.
TERRESTRIAL INTF Displays the following interface type:
•
G.703
•
ECL
•
PECL
•
MIL-STD-188
INTERFACE BUILD Displays the interface module type (1, 2, or 3). This menu is a
status-only window reporting the following four types of modem
operation:
•
Type 1 Base
•
Type 2 Doppler Buffer
•
Type 3 Doppler Buffer and ESC
INTERFACE OPTION This menu is a status-only window reporting the interface
options. The interface module options displayed are:
•
Buffer
•
ESC
•
RS (EFD)
•
RS (DVB)
•
ESC-64K
TX INTERFACE ESC This menu is a status-only window reporting the status of the
ESC interface. The TX options displayed are:
•
64K Data
•
2-32K Audio
RX INTERFACE ESC This menu is a status-only window reporting the status of the
ESC interface. The RX options displayed are:
•
64K Data
•
2-32K Audio
TX DATA PHASE Allows the user to invert TX data coming from the terrestrial
network.
On entry, press [ ← ] or [ → ] to select Normal or Inverted. Press
[ENTER] to execute the change.
Note: This menu is only available for the ECL, PECL, or
MIL-STD-188 interface.