Comtech EF Data SDM-9000 - Manual (Page 68)

Configuration SDM-9000 Satellite Modem
3–10 Rev. 4
3.5.1 Compatibility
For proper modem operation, the installed interface, modulator, and demodulator must
be compatible with the installed filters. Refer to the following table for baseband
interface data rates.
Interface Type Data Rates
G.703 8.448 Mbit/s
32.064 Mbit/s
34.368 Mbit/s
44.736 Mbit/s
51.840 Mbit/s
ECL/PECL 6.0 to 52.0 Mbit/s, in 1 bit/s steps
MIL-STD-188 6.0 to 13.0 Mbit/s, in 1 bit/s steps
3.5.2 Installation
Installation instructions for the field-installed Nyquist filters (AS/4124) include:
•
Unpacking/initial inspection
•
Tools required
•
Installation procedure
3.5.2.1 Unpacking Instructions
CAUTION
This equipment contains parts and assemblies sensitive to damage by ESD.
Use ESD precautionary procedures when touching, removing, or inserting
PCBs.
1. Remove the Nyquist filter PCB and mounting hardware from the cardboard
caddypack and anti-static material.
2. Check packing list to ensure the shipment is complete.
3. Inspect the Nyquist filter PCB for any shipping damage. Ensure all ICs are
seated properly.