Comtech EF Data SDM-9000 - Manual (Page 123)

Operation SDM-9000 Satellite Modem
4–50 Rev. 4
SDM-9000 "TYPE"
VER: 6.1.1
FUNCTION SELECT
UTILITY
UTILITY
FACTORY SET_UP
TX COURSE POWER TABLE ADJUST
TX FINE POWER TABLE ADJUST
TX FIXED POWER OFFSET
RX SIGNAL LEVEL CALIBRATION
MOD FLTS ENABLE
DEMOD FLTS ENABLE
TX INT FLTS ENABLE
RX INT FLTS ENABLE
TX MODULE RESET
RX MODULE RESET
INT MODULE RESET
ASSIGN TRANSMIT FILTERS
ASSIGN RECEIVE FILTERS
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 4-16. Utility Factory Setup Menu
4.2.5.6 Utility Factory Setup
CAUTION
This configuration is used for factory alignment. Factory setup should not
be changed by unauthorized persons. To do so may cause modem failure.