B.5 stored faults – Comtech EF Data SDM-9000 User Manual
Page 237
SDM-9000 Satellite Modem
Remote Control Operation
Rev. 4
B–19
B.5 Stored Faults
Information on stored faults is returned when requested. If no stored fault exists for a
given fault number, the words “NO Fault” will be returned instead of the normal
time/date status information.
The following symbols are commonly used to define the stored faults status commands:
•
#
Fault number (0 to 9). “0” is the first fault stored.
•
hh
Hours in 24-hr. format.
•
mm
Minutes.
•
ss
Seconds.
•
MM
Month.
•
DD
Day.
•
YY
Year.
Modulator
Stored
Faults
Command:
Response:
MOD_xxx'cr'
SYN_xxx'cr'
DCA_xxx'cr'
DCS_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
AGC_xxx'cr'
SCT_xxx'cr'
EXT_xxx'cr'
PROG_xxx'cr'
CONF_xxx'cr''lf']
Module
IF Synthesizer
Data Clock Activity
Data Clock Synthesizer
I Channel
Q Channel
AGC Level
Internal SCT Synthesizer
External Reference Activity
Programming
Configuration
Demodulato
r Stored
Faults
Command:
Response:
MOD_xxx'cr'
CD_xxx'cr'
SYN_xxx'cr'
RCS_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
DSCR_xxx'cr'
BERT_xxx'cr'
PROG_xxx'cr'
CONF_xxx'cr''lf']
Demod Module
Carrier Detect
IF Synthesizer Lock
Receive Clock Synthesizer
I Channel
Q Channel
Descrambler
BER Threshold
Programming
Configuration
Interface
Transmit
Side Stored
Faults
Command:
Response:
TXD_xxx'cr'
PLL_xxx'cr'
CLK_xxx'cr'
PROG_xxx'cr'
CONF_xxx'cr''lf']
Transmit Data/AIS
Transmit Synthesizer PLL Lock
Selected Transmit Clock Activity
Programming
Configuration