Figure 4-10. stored faults/alarms menu – Comtech EF Data SDM-9000 User Manual
Page 105
Operation
SDM-9000 Satellite Modem
4–32
Rev. 4
SDM-9000 "TYPE"
VER: 6.1.1
FUNCTION SELECT
STORED
FLTS/ALMS
MODULATOR X
DEMODULATOR X
TX INTERFACE X
RX INTERFACE X
COMMON X
BACKWARD ALARMS
X
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
IF SYNTHESIZER
DATA CLOCK ACT
DATA CLOCK SYN
I CHANNEL
Q CHANNEL
AGC
INTERNAL SCT SYN
EXT REF ACT
MODULE
PROGRAMMING
CONFIGURATION
See notes.
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
CARRIER DETECT
IF SYNTHESIZER
RX CLOCK SYN
I CHANNEL
Q CHANNEL
DESCRAMBLER
BER THRESHOLD
MODULE
PROGRAMMING
CONFIGURATION
See notes.
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
TX DATA/AIS
TX CLK PLL
TX CLK ACTIVITY
PROGRAMMING
CONFIGURATION
See notes.
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
BUFFER UNDERFLOW
BUFFER OVERFLOW
RX DATA/AIS
FRAME BER
BUFFER CLK PLL
BUFFER CLK ACT
DEMUX LOCK
RX 2047 LOCK
BUFFER FULL
PROGRAMMING
CONFIGURATION
See notes.
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
BATTERY/CLOCK
-12 VOLT SUPPLY
+12 VOLT SUPPLY
+5 VOLT SUPPLY
-5 VOLT SUPPLY
CONTROLLER
INTERFACE MODULE
See notes.
HH:MM:SS/MM-DD-YY
(FAULT LABEL)
BW ALARM RX #4
BW ALARM RX #3
BW ALARM RX #2
BW ALARM RX #1
BW ALARM TX #4
BW ALARM TX #3
BW ALARM TX #2
BW ALARM TX #1
See notes.
IDR overhead only.
Notes:
1. X = 0 to 9
2. Stored time/date will alternate.
HH:MM:SS, MM-DD-YY, or no fault.
UNAVAL SECONDS X
HH:MM:SS/MM-DD-YY
See notes.
Reed-Solomon only.
CLEAR??
Press [ENTER] to clear stored
faults.
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 4-10. Stored Faults/Alarms Menu