Comtech EF Data SDM-9000 - Manual (Page 243)

SDM-9000 Satellite Modem Remote Control Operation
Rev. 4 B–25
Bulk Consol.
Status
(continued)
Parameter
Number
Parameter Name
(Command Reference)
Description
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Descrambler enable
(ref. 'DE_' command).
Buffer clock source
(ref. 'BC_' command).
Interface buffer size
(ref. 'IBS_' command).
Interface transmit overhead type
(ref. 'ITOT_' command).
Interface receive overhead type
(ref. 'IROT_' command).
Interface substitution pattern
(ref. 'ISP_' command).
Interface read error
(ref. 'IRE_' command).
Transmit data fault
(ref. 'TDF_' command).
Receive data fault
(ref. 'RDF_' command).
Interface service channel TX1
(ref. 'ISCL_' command).
Interface service channel TX2
(ref. 'ISCL_' command).
Interface service channel RX1
(ref. 'ISCL_' command).
Interface service channel RX2
(ref. 'ISCL_' command).
Transmit data phase
(ref. 'TDP_' command).
Receive data phase
(ref. 'RDP_' command).
Backward Alarm enable TX1
(ref. 'BW_TX1_' command).
Backward Alarm enable TX2
(ref. 'BW_TX2_' command).
Backward Alarm enable TX3
(ref. 'BW_TX3_' command).
Backward Alarm enable TX4
(ref. 'BW_TX4_' command).
Backward Alarm enable RX1
(ref. 'BW_RX1_' command).
p36 = n, where 'n' is '0' (OFF) or '1' (ON).
p37 = n, where 'n' is '0' (INT), '1' (REF), '2' (EXT), '3' (SAT), or
'4' (HS).
p38 = nn, buffer size in milli-seconds.
p39 = n, where 'n' is '0' (NONE) or '1' (IDR).
p40 = n, where 'n' '0' (NONE) or '1' (IDR).
p41 = n, where 'n' is '0' (OFF) or '1' (ON).
p42 = n, where 'n' is '0' (FRM/OFF) or '1' (2047/ON).
p43 = n, where 'n' is '0' (NONE), '1' (DATA), or '2' (AIS).
p44 = n, where 'n' is '0' (NONE), '1' (DATA), or '2' (AIS).
p45 = nnn, service channel level in dBm.
p46 = nnn, service channel level in dBm.
p47 = nnn, service channel level in dBm.
p48 = nnn, service channel level in dBm.
p49 = n, where 'n' is '0' (NRM) or '1' (INV).
p50 = n, where 'n' is '0' (NRM) or '1' (INV).
p51 = n, where 'n' is '0' (OFF) or '1' (ON).
p52 = n, where 'n' is '0' (OFF) or '1' (ON).
p53 = n, where 'n' is '0' (OFF) or '1' (ON).
p54 = n, where 'n' is '0' (OFF) or '1' (ON).
p55 = n, where 'n' is '0' (OFF) or '1' (ON).