Comtech EF Data SDM-9000 - Manual (Page 239)

SDM-9000 Satellite Modem Remote Control Operation
Rev. 4 B–21
Bulk
Consol.
Analog
Status Command:
Response: >add/BCAS_p1,p2,p3, . . . pn'cr''lf'] This command is similar to the 'BCS_' command, but
returns modem analog parameters. Additional status of
new options and features will always be appended to the
end.
Where: 'pn' is the last parameter returned.
Parameter
Number
Parameter Name
(Command Reference)
Description
1
2
3
4
5
6
Receive Signal Level
(ref. 'RSL_' command).
Raw BER
(ref. 'RBER_' command).
Corrected BER
(ref. 'CBER_' command).
Interface Read Error
(ref. 'IRES_' command).
E b /N 0
(ref. 'EBN0_' command).
Buffer Fill Status
(ref. 'IBFS_' command).
p1 = xsnn, receive signal level in dBm.
p2 = xm.m -ee .
p3 = xm.m -ee .
p4 = tttt_xm.m -ee .
p5 = xnn.n, E b /N 0 in dB.
p6 = nn%, buffer fill status.
Note: Parameters 2 through 6 are dependent on carrier acquisition. If the decoder is not locked, empty data blocks are returned
(,,,,,).