Comtech EF Data SDM-9000 - Manual (Page 117)

Operation SDM-9000 Satellite Modem
4–44 Rev. 4
SDM-9000 "TYPE"
VER: 6.1.1
FUNCTION SELECT
UTILITY
UTILITY
SYSTEM
TIME: HH:MM:SS AM/PM
DATE: MM/DD/YY REMOTE BAUD RATE
X
PARITY
REMOTE ADDRESS OPERATION MODE
TEST MODE
STATUS
LAMP TEST???
Current time and date.
X =
110 1200
150 2400
300 4800
600 9600
19200
X = bps
Parity: even, odd, or none.
1 to 255
0 is reserved for global
address.
DUPLEX
TRANSMIT ONLY
RECEIVE ONLY
RF OUTPUT
REED-SOLOMON
RX 2047 PATTERN
TX 2047 PATTERN
INTRFC LOOP BACK
B-BAND LOOP BACK
RF LOOP BACK
IF LOOP BACK
CARRIER MODE
Press [ENTER] to turn on
all the front panel indicators
for three seconds.
MASTER RESET
HARD/SOFT
Initiating a hard reset will
result in the modem being
configured to the default
settings in ROM. Initiating
a soft reset will reset the
modem hardware, but will
save the current
configuration settings.
Note: The following
parameters do not revert to
default settings after a hard
reset:
· Address
· Parity
· Baud Rate
· Ext AGC: Min Pwr
· Ext AGC: Max Pwr
· Display Contrast
M&C MODULE FW
FW/NNNNNN-DDR
MM/DD/YY
FW/NNNNNN-DDR =
Firmware number
MM/DD/YY = Month/Day/
Year
DISPLAY
CONTRAST
LEVEL: 0 to 100
EXT AGC: MAX
PWR
0.0 to 10.0V
EXT AGC: MIN PWR
0.0 to 10.0V
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-
DEPENDENT
Parameter
Information
Key:
Figure 4-14. Utility System Menu