Cadac R-Type - Manual (Page 81)

Outputs and Matrix 8251 9-3
Revision R2005-2 R-Type
<1415 087(
Press this button to MUTE the matrix output signal.
<1416 9&$
Press this button to enable each MATRIX to be connected to the DC and MG assign-
ments via the fader below.
<1417 ,QVHUW
Press this button to connect the pre-fader send/return insert jacks to into the signal
path.
<1418 72%
Press this button to allow the talk-back to be picked up by each MATRIX mix bus.
<1419 /LVWHQ
Press this button to monitor each matrix output via the LISTEN module.
<141: 2XWSXW#OHYHO#PHWHU
This post-fader level meter displays the MATRIX output signal. The meter follows the
MUTE- switch.
<141; 0DWUL[#2XWSXWV
The OUTPUTS are routed to MATRIX 1 to 16 via 8 dual concentric controls. The gain
is 0dB when turned fully clock-wise.