Cadac R-Type - Manual (Page 112)

12-6 Listen & Stereo Output 8305
R-Type Revision R2005-2
4514145 ([W#,23#0#VHOHFW
This is a trim control, provided to compensate for differences between input and out-
put listening levels. The overall level is controlled by a single 60mm fader described
in 7.3.7. EXT I/P comes from a pair of XLR sockets on the module’s rear panel.
4514146 ([W#,23#0#OHYHO#DGMXVW
This rotary control is used to adjust the EXT I/P-level.
4514147 /HIW#RXWSXW#0#3KDVH#UHYHUVH
Pressing this button will reverse the polarity of the Left O/P.
4514148 $/7#223
The Listen section has two sets of XLR outputs, designed to be connected to loud-
speaker amplifiers. Pressing this button selects the second set of XLRs.
4514149 /#WR#/#)#5
Pressing this button will send the signal from the left channel to both the L & R chan-
nel outputs.
451414: 5#WR#/#)#5###
Pressing this button will send the signal from the right channel to both the L & R
channel outputs.
451414; ',0
Pressing the DIM button attenuates the LIsten L/S outputs 1 and 2.
451414< 087(
Pressing the MUTE button mutes Listen L/S outputs 1 and 2.
4514153 +HDGSKRQHV#0#VRXUFH#VHOHFW
These three switches allow you to select the Headphone output as PFL, Listen or Ext
I/P.
4514154 +HDGSKRQHV#RXWSXW
This rotary control adjusts the headphones signal level.
4514155 +HDGSKRQHV#0#087(
Pressing this MUTE switch will mute the headphones signal.