Cadac R-Type - Manual (Page 125)

GLOSSARY-VII
Revision R2005-2 R-Type
from an external processing device.
INTERCANCEL Used in conjunction with PFL and LIsten func-
tions, this term means that any active PFL or
Listen will be cancelled when a new signal is
selected. Note that even if the INTERCANCEL
mode is active, pressing a PFL or Listen, while
at the same time holding down any of the same
buttons on another module, will cause the sig-
nals to mix.
internal jumper Used internally in the console, jumpers can be
configured by the user to obtain a certain result.
internal jumper settings The configuration of jumpers required for a cer-
tain result.
ISO Abbreviation of ISOlate. This function is used to
isolate a fader from the automation system.
Isolate See ISO above.
jumper options Various ways to fit a jumper depending on what
result is desired.
L to L & R Mode selected on the Listen & Stereo output
module that allows sending the signal from the
Left channel to both the L & R outputs.
L-C-R bus Mixing busses for the left, centre and right
group. The bus can be used either for unpanned
centre with level control or full L-C-R panning.
LCR Master output module Master module for the L-C-R bus.
LED WR LED-indicator on a fader, indicating that the
fader is ready to record dynamic movements.
Listen LEFT When selected, this feature on the Listen &
Stereo Output module allows monitoring of the
LEFT channel.
Listen module Module for monitoring LISTEN and PFL selec-
tion.
Listen RIGHT When selected, this feature on the Listen &
Stereo Output module allows monitoring of the
RIGHT channel.
L-R panning Panning between Left and Right channels with
unpanned centre with level control.
MAIN FRAME Frame in a console setup that accommodates
the Central Control Module.
Main output See Matrix output.
map A description of the console layout stored in the
CCM.
master Fader controlling a group of channels.
Master DC fader See DC Master.
Master Fader names Appears on a display above the DC Master
fader. The fader name is stored in the CCM.
Master MUTE Located on the CCM, the Master MUTE
switches globally mute Input channels, outputs,
matrix and L-C-R outputs.
matrix Collective name for all the matrix send potenti-