Cadac R-Type - Manual (Page 42)

6-2 Central Control Module 8281
R-Type Revision R2005-2
4 0DVWHU#087(#VZLWFKHV
Four separate illuminated switches to globally mute the Input channels, Outputs,
matrix and Left-Centre-Right outputs. All four switches work independently, so that
any combination of Master muting can be selected at any time. The switches are
intended for manual operation only and will not be recorded with a scene state.
5 3&5
Illuminated and hooded switch that changes the console automation control main PC
to the back-up PC in the event of a failure in the main PC.
6 &RQVROH#LOOXPLQDWLRQ
These illuminated switches control the console illumination lamps ON/OFF and their
brightness.
7 /('#EULJKWQHVV
These illuminated switches control the brightness of the console LEDs.
8 )DQV
These illuminated switches control the cooling fans ON/OFF and their speed.
9 0,',
These two LEDs indicate the presence of data at either the MIDI input or output. The
illuminated switch enables the MIDI.
: (YHQWV
This illuminated switch enables the EVENTS relays to operate on a scene. An illumi-
nated LED indicates that an EVENT has been activated.
; 368#6\VWHP#4#)#368#6\VWHP#5
The R-Type console is designed to be able to use two sets of power supplies simulta-
neously. These eight LEDs continuously show the status of the two power supply
systems.
< $OO#PRGXOHV#,VRODWH#VHW#DQG#FOHDU
These two illuminated switches globally SET or CLEAR the ISOLATE function in all
modules.
43 5HVHW
Resets the console system. Pressing reset does not clear the internal memories,
maps etc.
44 6HQGV
Each of the first eight pair of SENDS to GROUPS from the input channels may be
enabled on the Central Control Module to act as dual mono or stereo sends.
45 $OSKDQXPHULF#GLVSOD\
This 24-character alphanumeric display is used for automation control and console
setup. It also displays the current scene status.