Cadac C-Type User Manual
G8;2
Table of contents
Document Outline
- Table of contents
- General Precautions
- 1 Connecting the mixer systems
- 2 Input channel module 7911
- 2.1 Input Channel 7911 - front panel
- 2.1.1 Input Gain
- 2.1.2 Input Trim
- 2.1.3 Input 2
- 2.1.4 Phantom Power
- 2.1.5 Line-up tone
- 2.1.6 M-S
- 2.1.7 Phase reverse
- 2.1.8 LINE
- 2.1.9 Stereo
- 2.1.10 Groups
- 2.1.11 HF Q control
- 2.1.12 HF Frequency, Boost/Cut control
- 2.1.13 HF EQ Bell/Shelf switch
- 2.1.14 MF Q control
- 2.1.15 MF Frequency, Boost/Cut control
- 2.1.16 LF Q control
- 2.1.17 LF Frequency, Boost/Cut control
- 2.1.18 LF EQ Bell/Shelf switch
- 2.1.19 Equalizer In/Out
- 2.1.20 HP Filter In/Out
- 2.1.21 HP Filter Frequency control
- 2.1.22 Aux Sends Pre switches
- 2.1.23 Aux Sends 1-4 level controls
- 2.1.24 Stereo foldback Pre switch
- 2.1.25 Stereo foldback
- 2.1.26 Direct Output Pre switch
- 2.1.27 Direct Output level
- 2.1.28 Sub-woofer level
- 2.1.29 5.1 Enable
- 2.1.30 4.0 Enable
- 2.1.31 2.0 Enable
- 2.1.32 Group Enable
- 2.1.33 Panning Front-Back
- 2.1.34 Panning Left-Right
- 2.1.35 Insert Pre/Post EQ
- 2.1.36 Insert In/Out
- 2.1.37 Solo
- 2.1.38 Meter D-O
- 2.1.39 PFL
- 2.1.40 MUTE
- 2.1.41 LED meter
- 2.1.42 Fader
- 2.2 Input Channel 7911 - rear panel
- 2.1 Input Channel 7911 - front panel
- 3 Dual Mono Group & Playback Module 8063
- 3.1 Dual Mono Group & Playback module 8063
- 3.1.1 LED-meters
- 3.1.2 Input Trim
- 3.1.3 Sub-woofer level
- 3.1.4 Panning F-B
- 3.1.5 Panning R-L
- 3.1.6 5.1 Enable
- 3.1.7 4.0 Enable
- 3.1.8 2.0 Enable
- 3.1.9 Track Playback Routing
- 3.1.10 Group to Stereo
- 3.1.11 Panning IN
- 3.1.12 Panning Left
- 3.1.13 Panning Right
- 3.1.14 Pre/Post fader
- 3.1.15 Insert
- 3.1.16 PFL
- 3.1.17 MUTE
- 3.1.18 Fader
- 3.2 Dual Mono Group & Playback 8063 - rear panel
- 3.1 Dual Mono Group & Playback module 8063
- 4 Stereo group & Playback Module 8064
- 5 Aux Groups Output Module 8065
- 6 Monitoring Module 7912
- 6.1 Monitoring module 7912 - front panel
- 6.1.1 SOLO level
- 6.1.2 Blend into SOLO
- 6.1.3 Blend into SOLO - ON
- 6.1.4 PFL - external speaker
- 6.1.5 Reverse Talkback - external speaker
- 6.1.6 Output level - external speaker
- 6.1.7 PFL - Headphones
- 6.1.8 Reverse Talkback - Headphones
- 6.1.9 Output level - Headphones
- 6.1.10 Shuffler
- 6.1.11 Output - Stereo Monitors ON
- 6.1.12 Output level - Stereo Monitors
- 6.1.13 MONO
- 6.1.14 Phase reverse of monitor speakers
- 6.1.15 Muting of monitor speakers
- 6.1.16 LP-filter ON
- 6.1.17 Sub-woofer trim-pot
- 6.1.18 Centre channel trim-pot
- 6.1.19 Left channel trim-pot
- 6.1.20 Left channel surround trim-pot
- 6.1.21 Right channel trim-pot
- 6.1.22 Right channel surround trim-pot
- 6.1.23 Monitor Dim level - Reverse Talkback
- 6.1.24 Monitor Dim level - DIM button
- 6.1.25 Monitor level
- 6.1.26 DIM-button
- 6.1.27 Monitor FROM
- 6.1.28 Monitor PLAYBACK
- 6.2 Monitoring module 7912 - rear panel
- 6.1 Monitoring module 7912 - front panel
- 7 OSC, PNG & Communications Module 7913
- 7.1 OSC/PNG & Communications module 7913 - front panel
- 7.1.1 48V monitor
- 7.1.2 +18V monitor
- 7.1.3 -18V monitor
- 7.1.4 13V monitor
- 7.1.5 Input TB microphone
- 7.1.6 Phantom power ON
- 7.1.7 PNG to Monitors
- 7.1.8 Osc or PNG to Channels
- 7.1.9 Osc or PNG to Groups
- 7.1.10 Osc or PNG to Stereo
- 7.1.11 PNG ON
- 7.1.12 Sine wave frequency select
- 7.1.13 Osc/PNG ON
- 7.1.14 Producer TB Phantom power ON
- 7.1.15 Reverse TB2 Phantom power ON
- 7.1.16 Reverse TB2 ON
- 7.1.17 MD Reverse TB Phantom power ON
- 7.1.18 MD Reverse TB ON
- 7.1.19 LED meter
- 7.1.20 OSC/PNG Output
- 7.1.21 Producer Microphone Gain
- 7.1.22 Reverse TB2 Microphone Gain
- 7.1.23 Reverse TB MD Microphone Gain
- 7.1.24 LED-meter
- 7.1.25 Engineer’s Talkback Select
- 7.1.26 Engineer’s Mic Gain
- 7.1.27 Cue lights
- 7.1.28 Slate
- 7.1.29 Engineer’s TB-button
- 7.2 OSC, PNG & Comms Module - rear panel
- 7.1 OSC/PNG & Communications module 7913 - front panel
- 8 External connections
- Appendices
- Index