4 bypass, 5 led indicators, 6 set – Cadac R-Type User Manual
Page 65: 7 isolate, 8 open
Mono Input Channel 8241
7-11
Revision R2005-2
R-Type
:1617
%\SDVV
Press this button to stop the channel VCA from being controlled by the DC Master
faders.
:1618
/('#LQGLFDWRUV
LEDs 1-16 indicate either the DC Master or MG assignments.
LED marked DC indicates that LEDs 1-16 are displaying DC Master assignments.
LED MG indicates that LEDs 1-16 are displaying MUTE GROUP assignments,
LED WR when ON indicates that the Fader is READY to record dynamic movements.
This LED will flash in WRITE mode and when the fader is actually generating record-
able information.
:1619
6(7
This button is used with the assignment panel 8285 beneath the CCM to assign the
fader to DC Master or MUTE Groups.
:161:
,VRODWH
Press this button to isolate the entire fader module from the automation system.
:161;
2SHQ
The OPEN LED illuminates when the channel VCA is open and not muted locally or
by assignment to a DC Master or MG.