Cadac R-Type - Manual (Page 24)

3-10
R-Type Revision R2005-2
■ ■ ■ ■ The 9-way ‘D-type’ free plug must have a conductive shell. This is to ensure that
the cable shield connects directly to the PSU unit chassis.
■ ■ ■ ■ Connect the cable shield to the metal panel where the remote start switch(es)
are mounted.
Great care must be taken with the wiring of the switch(es) to ensure that no short-cir-
cuits can occur between any two power supply units.
FIG 3-15. Remote start with multiple switches
FIG 3-16. Remote start with a single switch