Avery Dennison ALS 306 - Manual (Page 52)

53
5 A
FTER OPERATION
5.1 M
AINTENANCE AND CLEANING
ALS
306
309
GB
5.1.2 Regular maintenance
The label dispenser is designed to be
maintenance-free. However, you should service the
unit regularly in order to ensure reliable long-term
operating results.
Removing paper debris
Depending on operating conditions, you should
perform the following at least once a week:
£ Wipe the paper residue from the rollers and edges.
£ Clean the sensor lenses with a soft brush or cloth.
Renewal of the dust filter liner
CAUTION!
An exhausted filter liner can cause the
machine to overheat and to break down.
£ Replace the filter liner at both blowers
regularly.
The replacement interval of the filter liner has to be de-
fined individually according to…
– dust occurence
– operating times
The filter liner can be cleaned by blowing it out
with compressed air or by washing it out.
In case of overheating the machine, the error message
„5026 MotorProtect CPU“ appears, see “List of error
messages” on page 55.
Tools: Screw driver, medium size
£ Use a screw driver to press the plastic hook
upwards [55 arrow].
£ Replace filter liner [56A] by a new or cleaned liner
(article no. A9752).
£ Press the filter cover back in place.
[55] Hook at the dust filter housing of the ALS 30x.
[56] Filter liner (A).
A