Avery Dennison ALS 306 - Manual (Page 39)

40
3 B
EFORE OPERATION
3.2 I
NSERTING LABEL MATERIAL
ALS
306
309
GB
Threading the label web onto the drive
roller
£ Open the pressure roller. To do so, rotate the lever
[38A] in a clockwise direction.
£ Feed the backing paper around the deflection rollers
[38B] and the drive roller [38C].
£ Close the pressure roller. To do so, rotate the lever
[39], until it snaps in noticeably.
Threading the label web to the rewinder
£ Feed the backing paper around the deflection rollers
and the dancer arm as illustrated [40].
[41] Fastening the backing paper to the rewinder.
£ Clamp the backing paper to the rewinder as shown
and tighten it [40][41].
£ Manually rotate the rewinder by one turn.
[38] Open the pressure roller.
[39] Close the pressure roller.
A
B
B
C
[40] Backing paper threading around deflection rollers and dancer
arm.