6 design models – Avery Dennison ALS 306 User Manual
Page 19
20
2.1 O
VERVIEW
ALS
306
309
GB
2.1.6
Design models
The ALS 30x can be adapted to client requirements un-
der several aspects:
The label dispenser operation described in this
manual is based on the right-handed version
with the features pictured in [6]. Other versions
are only taken into account if the explanations
or figures of the designs differ significantly.
[8]
ALS 30X (RH) with the following features:
Conveyor direction = from left to right
Mounting position = vertical / side labelling
Unwinder amount = 1
Unwinder mounting point = top right
Aspect
Adaption
Conveyor direction
Right-handed (RH) /
Left-handed (LH) machine
Mounting position
of the machine
Horizontal / vertical
Top / side labelling
Mounting point at
the machine
Top / bottom / right / left / rear
side
Unwinder amount
1/2
Unwinder moun-
ting point
Top (right / left)
Side (right / left)
[6]
ALS 30X (RH) with the following features:
Conveyor direction = from left to right
Mounting position = horizontal / top labelling
Unwinder amount = 1
Unwinder mounting point = top left
[7]
ALS 30X (LH) with the following features:
Conveyor direction = from right to left
Mounting position = horizontal / top labelling
Unwinder amount = 2
Unwinder mounting point = lateral left and right