Avery Dennison ALS 306 - Manual (Page 16)

17
2 P
RODUCT DESCRIPTION
2.1 O
VERVIEW
ALS
306
309
GB
2.1.5 Technical specifications
Characteristics
1) The maximum usable dispensing speed depends on the label geometry.
Labels
2) Material passage width = Width of Label + Liner. Depending on the
dispensing edge width.
Label sensor
Power supply
3) Not accessible for user or service technician.
Electronics
Dispensing speed 1) :
ALS 306
ALS 309 max. 60 m/min
max. 45 m/min
Labelling halt precision at
the peeling edge:
Variable speed:
Constant speed: < ±1 mm
< ±0.5 mm
Speed control: Fixed setting or automatic
speed adaption via the
rotary encoder
Precision internal
OD-control OD ±3 %
Label material: Converted self-adhesive
label material with liner
Internal rewinding yes
Material passage width 2) :
ALS 306
ALS 309 up to 160 mm
up to 233 mm
Minimum label width: 20 mm
Label length: 20 - 600 mm
Label roll:
Winding direction
Unwinder (outer) Ø:
Rewinder (outer) Ø:
Core (inner) Ø: inner or outer
up to 400 mm
up to 270 mm
38.1 / 76.2 / 101.6 mm
(1.5 / 3 / 4 ")
Distance to peel edge
L-shape dispensing
edge:
19 mm
Transmission sensor: Wenglor OPT242-P800
optical, NPN
System voltage: 100-240 V (AC) at
60/50 Hz power frequen-
cy (permissible tolerance
±10%)
Current consumption: max. 5.1 A at 100 V
max. 2.1 A at 240 V
Power consumption: max. 510 VA
Fuses: Fuses integrated in the
power supply
3)
Processor: 32 Bit CPU MIPS Core
RAM: 16 MB
ROM: 4 MB
Realtime-clock none
Control panel: graphical display with
128 x 32 pixels, 2/4 lines,
5 buttons