Avery Dennison ALS 306 - Manual (Page 48)

49
4 O
PERATION
4.2 C
ONFIGURATION AND MONITORING
ALS
306
309
GB
If an error message occurs:
– The machine stops.
£ Press the button to delete the message.
£ Remove the rewound backing paper.
£ Insert a new material roll (see “Inserting a label roll”
on page 35).
Missing labels
A label missing from the label roll does not normally
affect the dispensing operation, because the label feed
continues until a label’s edge passes under the label
sensor.
Nonetheless, it can be important that missing labels are
reported. By configuring the function
LABEL SETUP >
Miss. label tol.
, you can specify whether an error message
is triggered after one or several missing labels.
Material tear
If the material path tears, one of these two messages
appears:
– Which message appears depends on where the
material path is torn.
– The machine stops.
£ Press the button.
Status num: 5002
Material end
Status num: 5140
Rewinder control