Avery Dennison ALS 306 - Manual (Page 22)

23
2 P
RODUCT DESCRIPTION
2.2 O
PTIONS
ALS
306
309
GB
Additional material guide disk
The additional material guide disk [16]A] improves the
lateral guiding of the material roll. This option is espe-
cially recommended, if very narrow material (< 30 mm
width) is processed.
Capacitive label sensor
Optional sensor, required for processing transparent
labels [17]. The sensor is mounted to the rods of the
dispensing edge holder.
Printer
If necessary, you can mount a hot stamp printer (not
available from Avery Dennison) onto the holder rods of
the dispensing edge.
Example of use: Printing consecutive numbers onto la-
bels.
Applicator
If it is not possible to label directly from the dispensing
edge, you can fit an applicator to the label dispenser.
Various types of applicators are available that depend
on the given requirements.
Simple applicators can be controlled directly via the
PLC signal interface that is available as standard.
Applicator interface
Additional board; allows almost all types of applicators
to be controlled.
[16] Additional material guide disk (A)
A
[17] Capacitive label sensor with bracket and cable.