Avery Dennison ALS 306 - Manual (Page 30)

31
2 P
RODUCT DESCRIPTION
2.4 F
UNCTION DESCRIPTIONS
ALS
306
309
GB
Miss. label tol. function:
– Missing label tolerance
– The maximum permissible number of successive
missing labels on the label strip
– Setting range: [0…10] mm; default: 1
– See chap. “Missing labels” on page 49
Stop count. mode function:
– Settings: [enabled, disabled]
Enabled: Dispenser counter counts backwards,
starting with the value that has been set using the
LABEL SETUP > Dispense counter
function. When the
counter reaches zero, no further labels are
dispensed.
Disabled: The dispenser counter counts forwards,
which means that the dispenser counter is
incremented with each label that is dispensed.
Label stop quan. function:
– After this amount of dispensed labels, the dispenser
stops
– Function only appears, if
LABEL SETUP >
Stop count. mode
= „Enabled“
– Setting range: [0…99999]; default: 0
2.4.4 MACHINE SETUP menu
Store prod. prof. function:
– Storing a product profile, see chap. “Storing a prod-
uct profile” on page 50.
Del. prod.profile function:
– Deleting a product profile, see chap. “Deleting a
product profile” on page 51.
Start error stop function:
– Determines how the machine responds in the event
of a product start error. A product start error occurs
when a new start signal arrives before the current
dispensing cycle has ended.
– Settings: [On, Off]
On: Start errors are issued. If a start error occurs,
the device stops and displays a relevant error
message.
Off: Start errors are ignored.
Turn-on mode function:
– The operating mode of the unit after it is turned on.
– Settings: [Online, Offline]
Online: Dispensing mode
Offline: Configuration mode
Language function:
– Language of the displayed text
– Settings: [English, French, German, Spanish, Ital-
ian, Dutch, Danish]