Avery Dennison ALS 306 - Manual (Page 33)

34
3 B
EFORE OPERATION
3.2 I
NSERTING LABEL MATERIAL
ALS
306
309
GB
3.2.1 Prerequisites
– The label dispenser is turned off at the main
switch [29A] (switch set to ‘O’).
£ Check that the safety installations are working
properly.
£ Inspect the machinery for any visible damage.
Report any defects immediately.
£ Remove any unnecessary materials and objects
from the operating area of the unit.
£ Make sure that only authorised persons are within
the operating range of the machine.
£ Use the required personal protective equipment
correctly; forexample, wear a hairnet, safety
glasses.
[29] Main switch (A) on the housing.
A
3.2
INSERTING LABEL MATERIAL