Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual - Manual (Page 63)

Troubleshooting 5-5
G e n e r a l E r r o r s
General errors indicate that incorrect data was received from the host.
After checking the packet and correcting the problem, transmit the
print job again.
Error Code Description
400 The character immediately following { is invalid.
404 The number or string that is currently being
processed is too long.
409 The printer memory is full. Delete unnecessary
formats or graphics from memory. If you are
using a graphic file that is very large, consider
using another mapping method (such as run
length encoding) to reduce the required memory.
410 Parity on the printer does not match the parity
on the host. Check the parity setting under
SETUP options.
411 Framing error. The printer cannot communicate
with the host. Make sure the host is turned on,
communication cables are connected correctly,
port settings are correct, and communications
are active. Check the baud rate, word length,
and stop bits to make sure they match those at
the host. Do not toggle between Microsoft 
Windows  and MS-DOS  while using the COPY
command, or you will receive a framing error.
Exit Windows before using the COPY command.
Re-transmit the data.
412 There is a problem with flow control between the
printer and the host. Make sure the printer and
the host flow control settings match (both are
DTR or both are XON/XOFF). If the error
persists, call Technical Support.
413 Online receive queue is full. Check your
printer's XON/XOFF or DTR SETUP values to be
sure there isn't a flow control problem.
414 The internal keyboard buffer is full or you need a
new keypad. Call Technical Support.
Continued on the next page