Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual User Manual
Page 38
3-8 Command Reference
L i b r a r y M a n a g e m e n t ( ^ l )
The Library Management command
♦
adds black and white .PCX graphics to the printer library.
♦
deletes all graphics, fonts, formats, and fields from the printer
library. You must delete a font library before replacing it.
♦
takes inventory of the printer library. The printer responds with the
Library Inventory response described in Chapter 4, “Response
Reference.”
The letter for this command is a lower-case L, not
the number one.
To download a graphic, use any communications program. For
example, if you use the DOS MODE and COPY commands, you would:
1. Set your PC communication parameters and serial port with the
MODE command.
2. Download the ^l command to the serial port using the COPY
command.
3. Download the .PCX file to the serial port. If you use COPY,
include the /b switch.
When downloading a graphic, do not interrupt the
previous procedure or send a graphic that exceeds
the space allotted. Either of these conditions may
lock the printer. To unlock the printer, turn it off
and then on again.