Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual User Manual
Page 58
4-6 Response Reference
Clearing Status Bits
When you correct printhead, paper out, temperature, or voltage errors,
the printer clears the status bits automatically. You must clear the
other status bits with the Clear Error Status (^C) command or by
pressing the left-hand A key. For more information, see “Clear Error
Status (^C)” in Chapter 3.
L i b r a r y I n v e n t o r y R e s p o n s e ( \ l I )
The printer responds to an inventory request from the Library
Management (^l) command with the Library Inventory response.
Syntax
\lI¦report¦\
report A report describing the contents of the printer library. This
report appears on the printer’s screen and lists the amount
of free and used memory (for fonts and graphics), and the
formats, fields, fonts, and graphics stored in the printer.
Example
\lI¦mem used: n/a
mem free: n/a
templates: 1,D,e,@
print regions: 5,G,j,{
fonts: 1:1000,2:1001,3:1003,16:16
graphics: E,F,H
¦\
This response specifies that the printer contains four formats (1, D, e,
and @), four fields (5, G, j, and {), four fonts (1, 2, 7, and 16), and
three graphics (E, F, and H).