Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual - Manual (Page 31)

Command Reference 3-1
C O M M A N D R E F E R E N C E
This chapter describes the RCL commands in detail, and they
appear in alphabetical order. Following is a summary of each
command.
Command Description
^A Change Communication Parameters
Changes the printer’s baud rate, parity, word length,
and flow control.
^C Clear Error Status
Clears batch errors from memory.
^F Delete Batches
Deletes all batches or only the current batch from the
printer.
^L Set Supply Length
Specifies the type of supply in the printer and where
data prints vertically on the label.
^l*
(lower-case
L )
Library Management
Adds or deletes graphics, deletes fonts, formats, and
fields from the printer library, or takes inventory of the
printer library.
^O Select Printe r Operation Mode
Sets the printer to on-demand or continuous dispense
mode.
^P Print
Specifies batch data and prints a specified number of
labels.
Continued on the next page
3