Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual User Manual
Page 51
Command Reference 3-21
F o n t D o w n l o a d ( { W )
The Font Download command sends information about new fonts to the
printer.
If you download a font that is greater than 64K, the
printer will reject the download.
This command is only for new fonts. If you want to download a font
using a number of an existing font, you must delete the existing font
first. The standard fonts that the printer comes with are described in
Chapter 2, “Fields and Formats.”
Contact your sales representative to obtain new fonts for the printer or
to see if any fonts you have will work with the printer.
Be sure to always back up your fonts.
Syntax
{W,identifier,A, R,mem -req¦
font_data¦
}
This command starts with a { character and ends
with a } character, instead of using the ^ character
in both places, as the other commands do.
identifier
The font identifier.
mem-req
One -sixteenth of the memory (in bytes) needed to
save the font image. For example, if the font requires
1600 bytes, enter 100. This value ranges from 0 to
2048.
font_data
The data representing the font images.