Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual - Manual (Page 40)

3-10 Command Reference
S e l e c t P r i n t e r O p e r a t i o n M o d e ( ^ O )
The Select Printer Operation Mode command sets the printer to print
and feed
♦
continuously (without pause) until the end of the batch.
♦
on-demand, or one at a time. The user must press F to print each
label.
Continuous mode is the default print mode. After the printer mode has
been changed, the printer stays at that mode until it is changed again.
Syntax
^O¦mode¦^
mode C Continuous mode
D On-demand mode
Example
^O¦D¦^
This command sets the printer to on-demand mode.