Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual - Manual (Page 48)

3-18 Command Reference
R e q u e s t P r i n t e r S t a t u s ( ^ S )
The Request Printer Status command asks the printer for its current
state. The printer responds with the Status response described in
Chapter 4, “Response Reference.”
Syntax
^S¦^
If the printer has a low battery or the receive buffer
is full, you can still receive the Status response by
sending an ENQ character (hexadecimal 5) to the
printer.
S l e e p M o d e ( ^ s )
The 9460 printer ignores this command.