Avery Dennison Sierra Sport2 9460 RCL Commands Programmer Manual User Manual
Page 41
Command Reference 3-11
P r i n t ( ^ P )
The Print command prints a batch of labels using a specified format.
If the printer battery loses power, replace the
battery. The printer remembers the last batch.
However, if you replace the battery without power
loss, you’ll lose the batch.
Syntax
^P¦identifier¦quantity¦field_1¦...¦field_n¦^
identifier
The format identifier. Enter any of the following
characters: 0-9, A-Z, a-z, :, ;, <, =, >, ?, @, [, \, ], -, and
‘.
quantity
The number of labels to print (1 to 9999). If you are
using on-demand mode, the quantity must be two or
greater.
field_1 ...
field_n
The data for each field in the format. Provide data in
the same order as the format definition. Text fields can
contain up to 200 characters.
To make your data streams more readable, put a carriage return
and/or line feed after each ¦ character. For example
^P¦A¦10¦
Field 1¦
Field 2¦
Field 3¦^
Carriage returns and line fields are also valid characters to include in
a field’s data.
Example
^P¦1¦1¦ACME HARDWARE¦43373737376¦^
This command prints one label using format 1, which contains two
fields. Field 1 is ACME HARDWARE, and field 2 is 43373737376.