Artesyn MVME4100ET Single Board Computer Installation and Use (June 2014) - Manual (Page 98)

MOTLoad Firmware
MVME4100ET Single Board Computer Installation and Use (6806800K76F) 98
The PCI Master is enabled.
 MVME4100>
vmeCfg -s -r234
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Master Control Register = 00000003
MVME4100>
The VMEbus Master Control Register is set to the default (RESET) condition.

MVME4100> vmeCfg -s -r238
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Control Register = 00000008
MVME4100>
The VMEbus Control Register is set to a Global Timeout of 2048 seconds.
 MVME4100> vmeCfg -s -r414
Displaying the selected Default VME Setting
- interpreted as follows:
CRG Attribute Register = 00000000
CRG Base Address Upper Register = 00000000
CRG Base Address Lower Register = 00000000
MVME4100>
The CRG Attribute Register is set to the default (RESET) condition.
 MVME4100> vmeCfg –s –i0
Displaying the selected Default VME Setting
- interpreted as follows:
Inbound Image 0 Attribute Register = 000227AF
Inbound Image 0 Starting Address Upper Register = 00000000
Inbound Image 0 Starting Address Lower Register = 00000000
Inbound Image 0 Ending Address Upper Register = 00000000
Inbound Image 0 Ending Address Lower Register = 1FFF0000
Inbound Image 0 Translation Offset Upper Register = 00000000
Inbound Image 0 Translation Offset Lower Register = 00000000
MVME4100>