AMETEK PLA-PLW Programming Manual - Manual (Page 52)

48
aaa = maximum power
bbb = maximum voltage
ccc = maximum current
ddd = maximum resistance
Example 300W-60V-60A-10KOHM
SYSTem:NET:ADDRess
This command sets or queries the IP address.
Command Syntax SYSTem:NET:ADDRess
Parameters IP address, in decimal dot notation.
Query Syntax SYSTem:NET:ADDRress?
Parameters None
Returned Parameters string representing IP address
SYSTem:NET:DHCP
This command queries the configuration state of the DHCP.
Query Syntax SYSTem:NET:DHCP?
Parameters None
Returned Parameters
0 = config from setup
1 = config from DHCP
SYSTem:NET:EOS
This command sets or queries the value of the end-of-string (EOS) code for Ethernet interface.
Command Syntax SYSTem:NET:EOS
Parameters end-of-string(EOS) code
0 = NULL(no EOS)
1 = CR
2 = LF
3 = CR/LF
Query Syntax SYSTem:NET:EOS?
Parameters None
Returned Parameters integer value representing EOS code
SYSTem:NET:GATeway
This command sets or queries the IP address of the gateway.
Command Syntax SYSTem:NET:GATeway
Parameters IP address in decimal dot notation.
Query Syntax SYSTem:NET:GATeway?
Parameters None
Returned Parameters string representing Gateway IP address
SYSTem:NET:STATe
The command queries the net configuration state.
Query Syntax SYSTem:NET:STATe?
Parameters None