Dialogic 6.2 - Manual (Page 73)

Developing a Fax Application
November 2009 73
BT_ZERO(args_fax);
args_fax.fname = "memo.txt";
args_fax.fmt = DATA_ASCII;
BfvFaxSendFile(lp, &args_fax);
Sends the ASCII text file, memo.txt the only file on the second page,
to the driver.
BfvFaxEndOfDocument(lp, &args_fax);
Indicates to the driver that the second page is the last page of the
transmission.
BT_ZERO(args_admin);
BfvLineDetach (lp, &args_admin);
Frees all the memory for the attached line and closes the device.
Receiving a Fax Using Function Calls for
Noninfopkt-Formatted Raw G3 Files
One way to receive a fax using function calls for
noninfopkt-formatted raw G3 files is demonstrated below. Each
function is presented in sequential order, and the action it performs
is described beneath it.
This example receives fax data into a buffer only and does not
include instructions for further processing the contents of the buffer.
BT_ZERO(args_admin);
args_admin.unit = unit;
lp = BfvLineAttach(&args_admin);
Attaches to a free channel and gets a BTLINE pointer.
args_admin.config_file_name = "usrcnfig.cfg";
BfvLineReset(lp,&args_admin);
Resets the channel and sets the user-configured options in the
user-defined configuration file usrcnfig.cfg.
BT_ZERO(args_tel);
args_tel.timeout = 0L;
BfvLineWaitForCall (lp, &args_tel);
Waits for the detection of an incoming call.
BfvLineAnswer (lp, &args_tel);
Answers the phone line by going off-hook.